Just Plug & Play - No difficult maneuvers or heavy lifts

BacTerminator® Dental was developed under a pure plug and play concept. The system is installed by an authorised service engineer between the incoming water supply and the dental unit and connected to the power. The unit is then ready for use.

As the system is equipped with a pump for stable water supply to the unit, the system can be placed some distance from the unit or in its immediate vicinity as desired. BacTerminator® Dental is developed in a compact design with a very low noise level and it is thus suitable for installation in direct connection with the dental unit.

The BacTerminator® Dental can also be used as a filling station for water for dental units with installed water tank for separate filling

Specifications:

Flow out:

• Capacity: 1-2 l/minute
• Flow: 2.4 l/minute
• Pressure: 2.4 bar (adjustable)
• Capacity filter cartridge: 1,000 l, 10° dH or every 6 months
• Alarm for: low pressure in, filter change, service, leakage
• H:452 mm, W:166 mm, L:430 mm

Requirements for feed water:

All versions: Fresh water of drinking water quality

• Filtered to: <1mm
• Conductivity: >70μS/cm
• Chloride level: >7mg/l
• Temperature: 5-40°C
• General: Pressurieed feed water (1-6 bar)
• Ambient temperature: 5-40°C

Electrical specifications

• 110V/230VAC PE 200W
• Standby use <10W

Specifications are subject to change without notice.

 

BacTerminator® Booster - the way to getting even more performance into your BacTerminator® Dental

BacTerminator® Booster is a specially designed unit that's boost the performance of your BacTerminator® Dental. It content of a booster and a high capacity BioReactionZone that's secure a high continues water flow even when more dental units is connected to one BacTerminator® Booster.

All components is of high quality so the meet the high standards of Adept Water Technologies products.
BacTerminator® Booster is produced according to the Medical Device Directive 93/42/EEC and EN ISO 13485.
 

BacTerminator® Booster systems:

	LxWxH in mm	Weight in kg	Inlet/Outlet, JG in mm	External connection
BacTerminator Booster	360x220x370	2.4	8/8	None

Installing of a BacTerminator® Booster module will affect consumption of consumables.

Never install a BacTerminator® Booster without consulting an authorized Adept Water Technologies dealer. Issues as types of connected units, length from BacTerminator® Dental to units, risk of death legs and others has to be taken into concern to optimize the performance of the BacTerminator® Dental.

Adept Water Technologies always recommend that instrument and mouth flush to be connected to the BacTerminator® as Legionella from mouth flush system has infected patients.